![]() Will Liver of sulfur give patina to fine silver? No, gold alloys will not react to most sulfur solutions.Ģ.Will Liver of Sulfur patina to gold-filled metals? Now let’s answer a few additional questions: 1. Be adventurous and watch how a kick of color can change your whole piece! If you are particularly interested in a specific effect, a test piece may be in order. For instance, a pink area may have a subtle pink to bright magenta. Ammonia, in my opinion, adds an additional element of wonder because it seems to make the LOS solution more “sensitive.” You are likely to get a tonal range instead of flat color. Gold’s become brighter, blues more saturated, and the purples pop. Colors intensify and have an iridescent effect. Iridescent effects:Īdding a tablespoon of ammonia to the LOS solution kicks the process up a notch. Before detailing, wash the piece in the sudsy, baking soda water mix. Be sure other areas have no LOS residue on them or they will darken as well. Put the piece on a cup warmer and apply LOS with the brush. You’ll notice the un-removed patina will continue to darken, while the area where the patina was removed becomes gold.Īlso, try detailing the LOS in selected areas. Then, wash in soapy water to remove hand oils and polish, and then dip again in LOS. Brush or selectively remove color from portions of the piece with a polishing cloth. Use any LOS recipe to develop one or two shades past gold or light brown, stopping with a cold-water bath. ![]() This is a soft and subtle patina that can have a sophisticated look! 4. More brushing will lighten the color, and a stiff brush will be more aggressive than a soft one. Use a steel or brass brush and a bit of hand soap to scratch brush the surface for a steely effect. Progress through coloring a piece until you reach a gray or blue-gray. Put the piece in the tumbler, add 1-2 tablespoons of hand soap or the recommended amount of a burnishing solution, and then add water to about an inch above the shot. After applying the patina, you may choose to remove or not remove highlights with a polishing cloth. This method will take the “Traditional antiqued” method to the next level, coloring the metal a reflective, deep gray-to-black similar to the mineral hematite.
0 Comments
Leave a Reply. |